If your machine is similar in shape to any of the machines listed here it will fit our tables. If the outer case on your machine is curved or sloped you will get the best fit by removing the accessory case and placing the table around the freearm. The dimensions on the fit details link will help you compare the different size tables to see which will best fit your machine(s) and work area. If your freearm is curved, there may be small gaps where the straight edge of the Sew AdjusTable® does not contact your machine. These small gaps usually don't matter and still allow you to enjoy the benefits of a large level surface around your machine. In the unlikely event you are unable to get an adequate fit to your machine, we will work with you to resolve the problem. We always offer our full money-back guarantee if you're not satisfied for any reason. See our Testimonials page to check for feedback on your machine.
- - - - - - - - Viking Customer Comments - - - - - - - -
The table fits great. I have a Husqvarna 730 Platinum. I have the table On the high notch for the legs and its just right. I am very happy with the table, the Quilting table for my machine cost $87.00 plus tax, so this table is quite a bargain for me. Thanks
I've put quite a few hours on the table with machine quilting this weekend already. The table is great and I can't imagine quilting without it. I have used it with the Elna Jubilee and the Viking Husqvarna Designer 1. It fit both quite nicely even though they are very different in size.
I have a Viking/Husqvarna Freesia sewing maching. The extension table fits it quite nicely. I experimented with different levels and found the middle hole works the best.
I have a viking rose machine and the table fits well.
I have meant to contact you, we love the tables in our studio. I used the large 24" on my Husquervna Designer I portable sewing machine, my partner used it on her Pfaff, not sure of the model. They were easy to assemble, and really save a lot of arm strength in keeping the fabric on an even plane.
I have a Bernina 910 and a Viking 400 that the table fits. I also tried it with a little Pfaff Hobby 2022. Each required an adjustment and did fit.
I am using the extension with a Viking 540. I certainly enjoy mine.
I use my extension table on my Viking 1100 and my whole collection of Singer 301's. (Long and short beds) I haven't tried it on my Featherweight yet but I don't have any doubt that it will fit. There are so many adjustments on this table, and the machines that it will fit, in my humble opinion, are limitless. This is a wonderful, versatile product.
"I have a Husqvarna Iris Embroidery machine and I'm STILL in love with the extension table...I tell EVERYONE about it...
"I have a Viking Platinum Plus. The table fits with the embroidery arm, with the slide on accessory box and without these as well and also the free arm. it also fits my daughter's machine which is a Viking 990. Once again, I can't say enough about the table. Next to my machine, It is my favorite accessory in my sewing room. "
"I am using my MATE on my Viking 1+ and it fits perfectly for free motion quilting because it is level with my machine. I Hope this helps, I really like your product!
"The table fits the Featherweight. It fits the Singer 500 Rocketeer with no problem. It fits my Singer 15-91 that is in a wooden case with no problem. It fits my Singer 301 just fine. It fits my Singer XL 5000 with the accessory arm on the machine (not freearm) and in the freearm mode. Since the left side of the bed is curved, there is a small space left between the table and the bed, but I have not found that to be a problem. It fits my Viking 4500."
"I use two machines with my table and they are a Viking Designer 1 and a Pfaff 6250 and it works great with both."
"I thought that you'd like to know that the tables just arrived safe & sound. I opened them both & started playing with the smaller one. I set it up to work with my Husqvarna Viking Designer 1 both with the free arm & full bed & it worked great!. But since I already had a quilting table for that & I really wanted one for my Kenmore Model 19153 (about 6 years old) I ran downstairs to it & tried it & then went on to my EuroPro Designer Deluxe Model (about 2 years old) & it worked on both of them too."
"I received my table today and I love it. It works with my Machine (viking1+) with or without embroidery unit, with or without accessory box and on the free arm only. It also works with my Elna (Golden Jubilee).
>"I use two machines with my table and they are a Viking Designer 1 and a Pfaff 6250 and it works great with both."
"I have a Viking 2000 and a Bernina Nova 900. The table is Great! "
"I have a Bernina 1260 Quilters Edition, and a Viking 930, I love my table.
"I use my tables on for my D1, Kenmore 19153 made by Janome, Euro-Pro Decorative Deluxe, & my Huskeylock 910 & my Simplicity SL350 serger. I have just been so thrilled with these tables. I just made my first quilted wallhanging & I couldn't have done it without the large table."
"I received my new Greer 24 table this week and I just love it. It is so easy to put up and take down. Very portable. Excellent workmanship and quality of materials. The machine I am using it with is a Husqvarna Victoria (similar to the Iris model just a face panel). The extra surface behind my machine is a blessing - keeps my quilt tops level with my sewing surface."